Description
In industrial automation and embedded systems, where VMEbus platforms must deliver blistering computational throughput for real-time algorithm execution and data orchestration without buckling under the load of dense peripherals or environmental extremes like EMI and thermal cycling, engineers routinely battle SBCs that throttle on cache efficiency or necessitate chassis-wide rewiring for performance leaps. The Motorola MVME5500-0163 steps in as a powerhouse VME single-board computer from the MVME5500 series, propelled by a 1 GHz MPC7455 PowerPC processor with AltiVec coprocessor to tackle vector-intensive workloads in high-stakes process control. Picture a medical imaging array crunching tomographic reconstructions or a defense telemetry node fusing multi-sensor streams amid shock and vibration—here, L3 cache misses or bus saturation can warp output fidelity, extend latency in fault trees, or cascade into system halts from power glitches. This module is indispensable in those high-reliability crucibles, where its 512 MB ECC SDRAM and dual 66 MHz PMC sites safeguard I/O signal integrity across congested backplanes, upholding system stability even as Gigabit Ethernet payloads balloon without sacrificing interrupt determinism.
The Motorola MVME5500-0163 is particularly crucial for accelerating legacy VME migrations, where its backward compatibility with IPMC761/712 modules allows drop-in enhancements from MVME2600/5100 forebears without enclosure overhauls that drag outages. Its 2 MB L3 cache and 256 KB on-chip L2 tackle the processing stalls that undermine 750-series boards in dust-veiled or vibration-racked industrial automation setups, while integrated SCSI-2 and dual Ethernet (Gigabit + 10/100BaseTX) streamline SCADA handoffs. At heart, it equips users for seamless VxWorks deployments with AltiVec-optimized code paths, compressing tuning cycles in validation suites. For OEM architects or modernization crews eyeing endurance in fortified racks, the Motorola MVME5500-0163 yields a high-reliability dynamo that transmutes upgrade frictions into scalable supremacy, where every AltiVec instruction fuels the surge of unflinching process control.
The Motorola MVME5500-0163 seizes the host throne in VMEbus realms, unleashing the MPC7455’s 32/64-bit PowerPC vein to command A32/D64 transfers via the P1/P2 backplane, with the Tsi148 bridge juggling up to 7 interrupt tiers for event triage. It weds 512 MB ECC SDRAM with 32 MB Flash and 2 MB L3 cache for fault-tolerant multitasking, harvesting inputs from dual Gigabit/10/100 Ethernet, two RS-232/422 serials, SCSI-2 DMA, and two PMC sites (33/66 MHz PCI) before herding via DMA to mezzanines like FPGA accelerators or DIO hubs. In a standard 6U VME enclosure, it sips +3.3 V/+5 V from the bus, arbitrating hot-swap under VME64x while MPIC timers trigger aborts to nix hangs in vital loops. This roots it mid-hierarchy—above PMC-forged field conduits but beneath kernel conductors—with JTAG for introspective debugging.
Its synergy shines for field hands; boot toggles span PXE nets or local ROM, and the 64-bit PCI expansion connector mates with user I/O boards for custom backends, easing DCS fusions via Ethernet PTP or SCSI arrays sans bridges. Diagnostics flicker via LEDs for link pulses or ECC snags, shuntable over telnet for off-crate autopsies, while redundancy via mirrored slots in duplex crates veils faults in core rings. For VME veterans, the Motorola MVME5500-0163‘s 30 W husk with IEEE P2 handles trims front clutter, affording razor loop honing in process control swaths from vector graphics to fusion engines, where it knits legacy VME with PMC potency absent thermal tolls.
- MVME5500-0163
| Specification | Details |
|---|---|
| Model Number | MVME5500-0163 |
| Brand | Motorola |
| Type | VMEbus SBC with Dual PMC |
| Input Voltage | +3.3 V / +5 Vdc (bus) |
| Operating Temp Range | 0°C to +55°C |
| Mounting Style | VME 6U Eurocard |
| Dimensions | 233 x 160 mm |
| Weight | 0.55 kg |
| Interface/Bus | VME64x (2eSST), 2x PMC (66 MHz PCI) |
| Compliance | IEEE 1014, CE, PICMG |
| Supported Protocols | Gigabit Ethernet, 10/100 Ethernet, RS-232/422, SCSI-2 |
| Typical Power Draw | 30 W |
Harnessing the Motorola MVME5500-0163 forges a reliability citadel that defies rack rigors, its screened bays and heat pipes clinching L3 coherence through RFI roils or grit gusts to quash corruptions that splinter workflows—reaping MTBF boons and surety in epoch-spanning vigils for bandwidth-bare industrial squads. Its onboarding finesse endures, with PMC-agnostic slots sanctioning hot mezzanine melds via graceful veils that dodge cascade curses, telescoping surge spans from halts to pulses and unfettering engineering ledgers in OEM husks where bridge orthodoxy skips harness hauls. This litheness laces to fused VME/PMC weaves, where its DMA ducts dash payloads unbridled.
Tendency trends oracular; ECC ledgers and serial scrolls unveil parity pricks for scalpel salves, lacing with quarterly vault voyages to attest latencies lacking line lags. The Motorola MVME5500-0163 heightens abiding arc by barricading chip churns through Flash flares for kernel kinships, which magnify mission yields in concurrent cords and carve latencies by 35% in fabric forays. This prescience not only assuages accretion aches but also latches loyalty to embedded ethos edicts, hailing it as a sagacious summons for automation arbiters vaulting vintages in networked, inexorable process control veils.
The Motorola MVME5500-0163 captains imaging pipelines in radiology suites, where it crunches PMC vector feeds for slice rendering, routing high-reliability I/O over VME spans in sterile process control citadels with inexorable frame fealty. In seismic data farms, it compiles geophone swarms for quake modeling, defying quake quivers while riveting critical system uptime through Gigabit in tremor-torn galleries. For avionics test bays, the board marshals sensor symphonies, proffering pinpoint Ethernet echoes against altitude airs to uphold fidelity beneath certification crosiers.
MVME5500-0161 – Base 512 MB model without IEEE P2 for front-I/O focused setups
MVME5500-0263 – 1 GB SDRAM variant for memory-swollen simulation workloads
MVME5500-6E-0163 – Extended-temp edition for -40°C to +85°C harsh-duty enclosures
MVME5100-0163 – Predecessor with MPC750 for cost-sensitive legacy bridges
MVME2604-712IO – Gigabit-only alternative with single PMC for network-centric nodes
MVME2400-0361 – Lower-clock 750-series for economical VME migrations
MVME162PA-344E – 68040-based IP slot model for mezzanine-heavy heritages
MVME3100-1261 – SoC compact successor for low-power embedded evolutions
Before inaugurating the Motorola MVME5500-0163, limit VME enclosure wattage to 55% reserve—excesses scorch silicon over 70°C—and scrutinize P2 wholeness for PMC sidebands, as lacunae throttle to polled drags that slacken syncs. Harness +3.3 V/+5 V at 6 A/3 A to rein startup surges past 35 W that unsettle bridges, and sculpt Flash with site-sired loaders from Motorola’s SDK to foil genesis glitches. For PMC nesting, calibrate chamfers at 0.1 mm norms, lest misaligns jumble clock cascades.
Nurturance highlights semimonthly LED laps for link lamps or SDRAM snags, yoked with backplane buffs for patina palls in vapor vaults—a deionized solvent sweep revives bereft of blemishes. Annual SDK sondes assay Flash firmness, corralling re-scribes in respites, and in PMC pacts, revolve realm rulership biannually to disperse transceiver taxes. These refined rituals, refined from rack runes, engender the Motorola MVME5500-0163‘s sinew with equilibrated elixirs.



WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626