GE IC200MDL930 VersaMax I/O

Description

Product Model: IC200MDL930
Product Brand: GE Fanuc / Emerson Automation Solutions
Product Series: VersaMax I/O
Product Features:

• 8 individually-isolated Form A (normally open) relay outputs, each capable of switching both AC and DC loads.
• Broad output voltage range: 0-265 V AC (47-63 Hz) and 0-125 V DC, with up to 2.0 A per point for resistive loads in many cases.
• High isolation: point-to-point and channel-to-ground up to 1500 VAC for 1 minute; strong protection in noisy industrial environments.
• LED indicators: one green LED per output showing on/off status, plus a module “OK” LED to indicate backplane power presence

Product Role & System Fit

In a VersaMax I/O rack, the IC200MDL930 plays the role of the discrete-output module. It mounts into a slot in the I/O carrier/backplane, draws its logic power from the backplane, and provides eight isolated output contacts that the system CPU or I/O network drives. The loads themselves (relays, solenoids, indicators) are powered externally, meaning you supply the voltage and wire from the module’s outputs to effect switching.

Because each output is ∙individually isolated, this module fits into architectures where outputs might go to different voltage domains or where ground loops must be avoided. For instance, in a large plant you might have 24 V DC loads and some 120 V AC loads in the same rack—using this module allows you to cater to both without dedicated modules for each voltage.

From a system-upgrade vantage point: if you already have a VersaMax installation, replacing or adding an IC200MDL930 is relatively painless—same carrier, same rack spacing, same wiring style. For inventory and maintenance, it’s beneficial because you can standardise on one module type for eight outputs, instead of stocking multiple variants for DC and AC. The reliability of the relay contacts (silver alloy, fixed coil moving armature) and the isolation spec mean you’re buying a module built for industrial conditions.